Disc magnet Ø 23 mm, height 4 mm, holds approx. 6,5 kg

Countersunk neodymium disc magnets with a height of 4 mm that can be fastened with a countersunk head screw. This magnet has the south pole on the countersunk side, allowing it to be combined with the magnet CS-S-23-04-N. In combination, it is particularly suitable for concealed or detachable connections in furniture construction, interior design, booth construction, shopfitting, or for technical devices.

Please note: Neodymium magnets are brittle and can break under excessive application of force. Not all holding surfaces are level, which is why magnets need a little slack. This allows them to optimally align with the ferromagnetic object and extend the highest adhesive force. That is why we recommend fastening these magnets by hand.

The following screws fit into the hole of these magnets, for example:

• Slotted countersunk wood screws: DIN 97 (3,5 mm)
• Cross recessed countersunk flat head screws (machine screw): ISO 7046-2 M3 (3 mm)
• Hexalobular socket countersunk flat head screws (machine screw): ISO 14581 M3 (3 mm)
• Hexagon socket countersunk flat head screws (machine screw): ISO 10642 M3 (3 mm)

Note: You cannot use two of these magnets directly together because their countersunk sides repel each other. Therefore, ensure correct polarity during installation.

Neodymium magnets are perfect for use in dry indoor areas.