Rubber discs self-adhesive Ø 20 mm

to protect surfaces, 36 per set

Attribute name	Attribute value
Item number	M-SIL-20
Unit of Sale	1 set

Description

These self-adhesive rubber discs increase the friction between the disc magnet and the mounting surface and thus increase the magnet’s load capacity in the shear direction. Under ideal conditions, rubber discs can double or triple the adhesive force of a magnet in the shear direction. This increase depends, however, on the individual material pairing, the thickness of the magnets and potentially the temperature and can therefore not be calculated exactly. The self-adhesive rubber discs also protect delicate surfaces from scratches.

You can either glue them directly on the underside of a round magnet or to the metal surface where the magnet will be attached. The strong 3M adhesive ensures long-term hold. The adhesive cannot withstand temperatures above 80 °C over long periods of time, but exposure to temperatures of up to 150 °C for a few minutes should not have an adverse effect. Like all self-adhesive products, silicone discs need to be placed on smooth surfaces, pressed on firmly and then be allowed to rest for best results. All information about the 3M adhesive on these self-adhesive rubber discs can be found in the technical data sheet (PDF, English).

Prior to using anti-skid pads on a large scale, we definitely recommend performing a few tests.

Technical data

Attribute name	Attribute value
Article ID	M-SIL-20
EAN	7640155439442
Diameter	20 mm
Thickness	0,5 mm
Pieces per sheet	36 pieces
Adhesive	3M, No. 9080A
Shelf life adhesive	24 months (approx.)
Design	Rubber disc
Weight	25 g/set
PDF data sheet

Product Safety Information

Manufacturer: Webcraft GmbH / supermagnete, Industriepark 206, 78244 Gottmadingen, Germany, support@supermagnete.com

Not suitable for children under the age of 14. May contain small parts or release them if broken – Choking hazard!

Use only for the intended purpose. Improper use may result in damage or injury.

Additional features and tips

When a heavy load is applied to magnets in shear direction, the silicone discs may come off the magnets. The silicone discs are not helpful with small or very thin disc magnets since the additional distance of 0,5 mm (material thickness) between magnet and surface may even decrease the adhesive force.

The silicone discs are available in various diameters ranging from 10-20 mm. Further information can be found in the technical data sheet.

The disc magnet S-20-10-N (20x10 mm) can hold approximately 1,75 kg in shear direction, then the steel plate starts sliding down.

With a self-adhesive silicone disc between magnet and steel plate (invisible because it has the same diameter as the disc and is only 0,5 mm thin) the disc magnet can hold over 5 kg in shear direction; then it starts to slide down.