Dexterity Game
For this game you need a steady hand and a lot of patience
Online since: 12/12/2007,
Number of visits: 310980
0
The slanted wooden cylinder has a diameter of approximately 3 cm and is 7 cm long.
Whether the cylinder is slanted or not doesn't matter; you could just as easily play the game with the cylinder standing straight up.
I simply find it more challenging when the cylinder is slanted.
The wooden cylinder has been glued with epoxy resin to a piece of wood approximately 10 x 10 cm large.
Normal wood glue would probably also do the trick.
In my case, the base is made of 4mm plywood and the cylinder is probably a piece of a broomstick.
:-)
Before glueing, drill a hole into the cylinder (with the same diameter as the magnetic sphere, perhaps even a little smaller).
With a countersinking drill you can adjust the size of the hole.
The depth of the hole is not important.
The sphere magnet of the type K-13-C
was glued on with a strong adhesive, but it would suffice to simply push the magnet into the hole as deep as possible.
The number of steel spheres
you use is not important - I've never managed to attach more than 30 in any case.
Oh yes, the rules of the game: aaaahhhhh...
The goal is to bring as many steel spheres as possible onto the magnetic sphere.
Of course, one could set a limit of 25 steel spheres (difficult!), or perhaps take turns adding a steel sphere and whoever sets one that doesn't "stick" has lost.
You can be creative here!
The entire content of this site is protected by copyright.
Copying the content or using it elsewhere is not permitted without explicit approval.
Copying the content or using it elsewhere is not permitted without explicit approval.